Our POU Adsorbers offer maximum removal of either oil vapour or water vapour at your point of application from the compressed air network. The unit is normally installed at the point of use and consist of a vessel with a replaceable cartridge. Depending on your requirements it can either be filled with either activated carbon for oil vapour removal down to 0.003 mg/m³ or desiccant for water vapour removal with pressure dew point down to -40°C.
Replaceable activated carbon or desiccant cartridges are convenient to use and easy to maintain to ensure clean & dry air wherever you need.
Guarantee air purity for your point-of-use applications with maximum oil vapour removal and zero humidity.
Integrated pre and post filtration for optimum results – install a H-grade fine coalescing filter at the inlet side of the adsorber for optimum results.
Contact us for further technical assistance.
High-efficiency filtration for clean and technically oil-free compressed air. 12 model series with flow rate capacity from 0.66 - 46.62 m3/min
High performance; easy maintenance; reliability guaranteed. 14 model series with flow rate capacity from 0.83 - 50.00 m3/min
High-efficiency filtration for clean and technically oil-free compressed air. 12 model series with flow rate capacity from 0.78 - 67.91 m3/min
The ETD180 is designed for all compressed air system components and incorporates a wide voltage range.