Compressed air is normally saturated with moisture in the form of water vapour as well as aerosol, and this needs to be removed to prevent problems further downstream at the point of application. AFE’s especially designed based on the proven centrifugal separation to remove up to 99% of the water aerosol in compressed air. Working in conjunction with other compressed air treatment products like filters, after-coolers and dryers, the water separator is a very cost effective way of further enhancing their efficiency by ensuring that bulk water generated in compressed air is properly separated and discharged from the system.
The centrifugal mechanism of our water separator removes 99% of bulk water and is simple, efficient and maintenance free.
Working with other compressed air treatment products the water separator is a cost-effective addition to ensure that bulk water is properly separated and discharged.
Moisture and condensation should be removed as quickly as possible to prevent damage to your compressed air system.
Contact us for further technical assistance.
High performance; easy maintenance; reliability guaranteed. 14 model series with flow rate capacity from 0.83 - 50.00 m3/min
High-efficiency filtration for clean and technically oil-free compressed air. 12 model series with flow rate capacity from 0.66 - 46.62 m3/min
Simple yet effective POU Adsorbers for removal of oil or water vapour at the specific point of application
High-efficiency filtration for clean and technically oil-free compressed air. 12 model series with flow rate capacity from 0.78 - 67.91 m3/min